WITH 5.5
Standard Features:
- With 5.5" SNT screen. Mounted on 4 castors. 2 front castors with brakes.
- With 2 big drawers
- Handle for easy maneuvering.
- Aluminium alloy rail frame. With durable and non-corrosive stainless steel platform.
- Equipped with high precise Anesthesia Vaporizer (with temperature, flow and pressure compensation function).
- The agent output is continuous, stable & precise.
- The agent type: Isoflurane OR Enflurane.
- With independent Anesthesia Ventilator, the ventilator frame is moulded and height can be adjusted. The ventilator can display P-t and V-t wave-form at the same time.
- Classical CO2 circle absorber with 2 canisters for low resistance and minimum gas leakage.
- Fresh gas outlet is in front of frame for the user to easily connect Jackson-Rees circuit.
Optional : O2, N2O Yoke device. When main gas supply is fails, the backup gas supply starts.
| Feature : | |
|---|---|
| Patient type : | Adult, Pediatric Driven mode : Pneumatically driven electronically controlled |
| Mode : | Semi-open, Semi-closed or closed system |
| Anesthetic vaporizer : | One high precise Vaporizers |
| Power supply : | 220V±10%, 50Hz±1Hz |
| Power consumption : | <50W |
| Internal battery : | DC12V (over 2 hours) |
| Anesthesia Ventilator Specification : | |
| Respiration mode : | IPPV, SIMV, SIGH, MANUAL |
| Waveform : | P-t, V-t |
| Tidal Volume : | 50 ~ 1600ml |
| Respiratory frequency : | 1 to 65 BPM |
| I: E ratio: | 8: 1~1: 8 |
| Alarm parameters: | High pressure alarm Low pressure alarm O2 source failure alarm AC power failure alarm |
| High pressure alarm limit: | 20~60CMH2O |
| Low pressure alarm limit : | 0~20CMH2O |
| Monitor parameters : | Tidal volume, MV, Ppeak, PEEP, respiratory frequency, I: E ratio, Airway pressure |
| Safety valve pressure limit : | 6 Kpa |
| Good air tightness, high reliability and minor respiration impedance | |
| Main Unit : | |
| Circle absorber : | Compact circle absorber |
| Flow meter : | O2, N2O four-tube flow meter O2 tube: 0L/min~1L/min~10L/min N2O tube: 0L/min~1L/min~10L/min |
| O2 and N2O Linkage Device: Adjust O2 and N2O in proportion ( keep O2 concentration not lower than 25% ) | |
| Oxygen Flush : | 25L/min ~ 75L/min |
| Gas source pressure : | O2 : 0.25 ~ 0.65Mpa N2O: 0.25~ 0.65Mpa |
| Gauge : | Two gauges, N2O, O2 |